Home >> Article >> Ford Mustang Fuel Pump Replacement 2005 - 2008
 
Search MechanixTrix
 
Search
 
 
Sponsors
   
 
Ford Mustang Fuel Pump Replacement 2005 - 2008
ArticlePart InfoCategorizationAssociated FilesEdit ArticleHistory
Article Applies From: 2005 To:
 
 
Tools
 
 
Instructions
 
Step 1
Depressurize fuel system
Step 2
Remove backseat


Step 3
Wich pump or sending unit do you want to replace.
Drivers side is the pressure pump.
Passenger side is the jet the pump and secondary pump

Step 4
Remove the plastic cover of pump you want to remove.


Step 5 
Disconnect electrical connector and fuel line.
Push in on green tab to release fuel line.
Step 6 
Remove fuel pump assembly retaining ring using special tool or hammer and screw driver

Step 7 
Pull pump up till you can see secondary fuel line installed on unit
undefined
You need to release secondary fuel line by pushing in tab,same as line on top of fuel pump. Be careful though tank is very sharp and will cut you.
Step 8
Reinstall all after changing pump or sending units.
When installing retaining ring I use a second screwdriver 180 degrees from the one i'm using to install to make sure ring gets installed properly and then double check with mirro and flashlight
Vehicle list applied to this article:-
Make Model Variant From To
Ford Mustang 2005 2008
  Inserted Text     Removed Text       Changed Text
Difference between revisions :
 
 
Associate Files to Article
Videos  (Click on the links to play video)
No Video Available for this Article
Documents 
No Document Available for this Article
Image 
Title Size
ford mustang fuel pump view.jpg (34406 Bytes )
ford mustang fuel pump connector view.jpg (38112 Bytes )
ford mustang back seat.jpg (31022 Bytes )
ford mustang fuel pump tank view.jpg (1869270 Bytes )


 
Powered by Abinko | Official Rules | Legal Notices and Privacy Article Help | Help | Future Article List | About Us | Contact Us | Sitemap | Article List  
 

© Copyright 2008 MechanixTrix.com All rights reserved.